Tapes - Skived and Rolls

 

 

ABS-
ACETAL (POM)
ACRYLIC (PMMA)
Carbon Fiber
Cellulose Acetate and Butyrate
CPVC

ETFE
EVA
Films
FIBERGLASS FRP
Fluorpolymers

Fluorosint®

 

Graphite
HDPE (High Density Polyethylene)
Hytrel Sheets®

Kapton®

 
Kevlar®
KYDEX®  FR Sheets
Laminates - Phenolics -Micarta  
LDPE (Low Density Polyethylene)
MDPE (Medium Density Polyethylene)
Mylar® 
Neoprene® 
Nomex Film®
Norprene®
Noryl®
Nylon
PBI
PBT
PCTFE
Peek
PetG - PetP
PES Plastic Sheet

PFA
Polycarbonate
Polyester
Polyimide-Vespel, Cirlex, Pyropel 
Polypropylene
Polystyrene (HIPS)
Polysulfone
Polyurethane

 
PPS
PVC
PVDF
Rubber
Santoprene TPE
Silicone
Sintimid 
TEFLON®  

Torlon
TPX Films
Tygon Tubing

 
UHMWPE
Ultem

Texas Longhorns

Contact Kmac Plastics

Privacy

 

Domestic Selling Policy

Square Watermelon Cases

Tube Caps & Plugs
Celazole Technical Data
Physical Properties Metric English Comments
Density 1.3 g/cc 0.047 lb/in³  ISO 1183
Water Absorption 0.5 % 0.5 %  24 hour immersion; ISO 62
Water Absorption 1.06 % 1.06 %  96 hour immersion; ISO 62

Mechanical Properties
Tensile Strength, Ultimate 160 MPa 23200 psi  ISO 527
Elongation at Break 3 % 3 %  ISO 527
Tensile Modulus 5.8 GPa 841 ksi  ISO 527
Compressive Yield Strength 42 MPa 6090 psi  at 1% nominal strain; ISO 604
Compressive Yield Strength 82 MPa 11900 psi  at 2% nominal strain; ISO 604
Charpy Impact, Notched 0.35 J/cm² 1.67 ft-lb/in²  ISO 179/1eA

Electrical Properties
Electrical Resistivity 1e+014 ohm-cm 1e+014 ohm-cm  IEC 93
Surface Resistance Min 1e+012 ohm Min 1e+012 ohm  IEC 93
Dielectric Constant 3.3 3.3  1 MHz; IEC 250
Dielectric Constant, Low Frequency 3.3 3.3  100 Hz; IEC 250
Dielectric Strength 22 kV/mm 559 kV/in  IEC 243
Dissipation Factor, Low Frequency 0.001 0.001  100 Hz; IEC 250

Thermal Properties
CTE, linear 20°C 25 µm/m-°C 13.9 µin/in-°F  average value between 23 and 100°C
CTE, linear 100°C 25 µm/m-°C 13.9 µin/in-°F  average value between 23 and 150°C
Thermal Conductivity 0.4 W/m-K 2.78 BTU-in/hr-ft²-°F  
Maximum Service Temperature, Air 310 °C 590 °F  20,000 hours continuous
Maximum Service Temperature, Air 500 °C 932 °F  for short periods
Deflection Temperature at 1.8 MPa (264 psi) 425 °C 797 °F  ISO 75 method A
Flammability, UL94 V-0 V-0  1.5 mm thickness
Flammability, UL94 V-0 V-0  3 mm thickness
Oxygen Index 58 % 58 %  ISO 4589
 

 

 

 

 

 

Steel Metal Balls

Tube Caps & Plugs

Springs

Eyebolts

Threaded Rods

Carriage Bolts

Dowel Pins

Lag Screws

Self Drilling Screws

Spring Pins

Drill Bits

Set Screws

Taper Pins

Wood Screws

Sheet Metal Screws

Tapping Screws

Machine Screws

Channels

Felt Discs, Sheets, Strips

 

K-Mac Plastics  3821 Clay Ave. SW, Wyoming, MI  49548

   Contact Kmac Plastics

Privacy

Domestic Selling Policy

Goods and services provided by K-mac Plastics (MI, USA).
Sold by 2CheckOut.com Inc. (Ohio, USA).

Acrylic Pig Show Pipes

Circuit Breakers, UHMW Sheets, Composite Sheets, Pinewood Derby Cars, Steel Plates, Rods, Tubes, Bars, Wooden Puzzle Boards