Noryl EN265 Properties

Properties
Physical			Nominal Values		(English)		Test Method

	Density -Specific Gravity			1.08		sp gr 23/23°C		ASTM D792

	Mold Shrink, Linear-Flow (0.125 in)			0.0050 to 0.0070		in/in		ASTM D955

	Water Absorption @ 24 hrs (73 °F)			0.070		%		ASTM D570


Mechanical			Nominal Values		(English)		Test Method

	Tensile Strength @ Yield			9200		psi		ASTM D638

	Tensile Elongation @ Brk			25		%		ASTM D638

	Flexural Modulus (4.00 in Span )			370000		psi		ASTM D790

	Flexural Strength @ Yield (4.00 in Span )			14400		psi		ASTM D790


Impact			Nominal Values		(English)		Test Method

	Notched Izod Impact							ASTM D256
		(-40 °F)		2.50		ft-lb/in
		(73 °F)		3.50		ft-lb/in

	Gardner Impact							ASTM D3029
		(-40 °F)		36.0		in-lb
		(-22 °F)		132		in-lb


Hardness			Nominal Values		(English)		Test Method

	Rockwell Hardness (R-Scale)			119				ASTM D785


Thermal			Nominal Values		(English)		Test Method

	DTUL @264psi - Unannealed (0.250 in)			254		°F		ASTM D648

	CLTE, Flow (-40 to 200°F (-40 to 93°C))			3.3E-005		in/in/°F		ASTM D696


Electrical			Nominal Values		(English)		Test Method

	Dielectric Strength (In Oil, 0.125 in)			500		V/mil		ASTM D149

	Dielectric Constant (60 Hz)			2.690				ASTM D150

	Dissipation Factor (60 Hz)			0.00070				ASTM D150

	Arc Resistance (PLC) (Tungsten Electrode, 0.125 in)			PLC 6				ASTM D495


Ignition Characteristics			Nominal Values		(English)		Test Method

	UL File Number (USA)			E121562

	Flame Rating - UL							UL 94
		(0.236 in)		V-0
		(0.0590 in)		V-1

	Limiting Oxygen Index			29		%		ASTM D2863


UL 746			Nominal Values		(English)		Test Method

	Rel Temp Indx Mech w/oImp			230		°F		UL 746

	Rel Temp Indx Mech w/Imp			221		°F		UL 746

	Rel Temp Indx Elect			230		°F		UL 746

	Comparative Tracking Index (CTI) (PLC) (0.125 in)			PLC 1				UL 746

	High Voltage Arc Tracking Rate (HVTR) (PLC) (0.125 in)			PLC 4				UL 746


Additional Properties

	CSA (See File for complete listing), CSA LISTED: LS88480 File No. Radiant Panel Listing, UL tested: RP100 UV-light, water exposure/immersion, UL746C: F1