Modified TIVAR® formula for enhanced stability in outdoor applications. While non-UV formulations are suitable for unexposed situations, TIVAR® UV Resistant retains its low-friction surface, resistance to wear, corrosion resistance and impact strength up to three times longer.
TIVAR® UV Resistant is available in sheet.
| Property | Method | SI Unit | SI Value |
|---|---|---|---|
| Density | ASTM D-792 | g/cm3 | 0.953 |
| Yield Point | ASTM D-638 | MPa | 20 |
| Elongation at Yield | ASTM D-638 | % | 15 |
| Tensile Break | ASTM D-638 | MPa | 45 |
| Elongation at Break | ASTM D-638 | % | 290 |
| Tensile Modulus | ASTM D-638 | MPa | 913 |
| Flexural Modulus | ASTM D-790 | MPa | 723 |
| Izod Impact (Charpy Notched Impact) | ASTM D-4020 | kJ/m2 | 113 |
| Tensile Impact | DIN 53448 | kJ/m2 | 3096 |
| Sand Wheel Wear | ASTM G-65 | T-1000=100 | 113 |
| Hardness | ASTM D-2240 | Shore D | 69 |
| Static Friction | ASTM D-1894 | Unitless | 0.18 |
| Dynamic Friction | ASTM D-1894 | Unitless | 0.15 |
| Coefficient of Thermal Exp | ASTM D-696 | °C-1 | 0.00018 |
| Melt Point | ASTM D-3417 | °C | 137-143 |
| Compressive Modulus | ASTM D-695 | MPa | na |
| Compressive Deformation | ASTM D-621 | % at 454.5kg | na |
| Volume Resistivity | ASTM D-257 | Ohm-cm | >1015 |
| Surface Resistivity | ASTM D-257 | Ohm | >1015 |
| Water Absorption | ASTM D-5706 | % | nil |