This general purpose, non-kinking duct hose has a narrow pitch which allows for a tight bending radius while maintaining smooth air flow. Resistant to many oils, solvents, ozone, water, fungus and alkalis. Not recommended for continuous flexing.
Applications: Recommended for industrial air movement and fume control applications, Aircraft, Automotive, Brake Ducting, Brick Kilns, Cab Ventilation, Defroster/Heater Hose, Dry Cleaning, Dryer Hose, Heater, High Temperature Applications, Paper Mills, Plastics Industry, Transmission Cooling
Single Ply Silicone Coated Fiberglass Hose, Spring Steel Wire Helix, Non Kinking, 12' Lengths | |||||||
Temp range -65°/+500°F, Iron Oxide Red | |||||||
Part # | ID | Compression Ratio (Ft:In) | Max Neg Pressure (in/hg) | Max Pos Pressure (PSI) | Min Bend Radius | Price | Order Online |
---|---|---|---|---|---|---|---|
KH-1380 | 1.00" | 3:01 | 29" | 30 | 1.20" | $229.91 | Add to Order |
KH-1381 | 1.50" | 3:01 | 29" | 30 | 1.50" | $252.25 | Add to Order |
KH-1382 | 2.00" | 3:01 | 29" | 30 | 2.00" | $258.13 | Add to Order |
KH-1383 | 2.50" | 3:01 | 29" | 30 | 2.375" | $310.17 | Add to Order |
KH-1384 | 3.00" | 3:01 | 22" | 30 | 3.00" | $324.87 | Add to Order |
KH-1385 | 3.50" | 3:01 | 22" | 30 | 3.00" | $338.39 | Add to Order |
KH-1386 | 4.00" | 3.5:1 | 19" | 27 | 3.40" | $351.92 | Add to Order |
KH-1387 | 4.50" | 3.5:1 | 13" | 25 | 3.70" | $391.90 | Add to Order |
KH-1388 | 5.00" | 3.5:1 | 7" | 21 | 4.10" | $405.43 | Add to Order |
KH-1425 | 6.00" | 4.5:1 | 4" | 13 | 4.40" | $472.75 | Add to Order |
KH-1463 | 8.00" | 4.5:1 | 4" | 13 | 4.40" | $538.02 | Add to Order |
Rev. 06-21 |
ID Tol. -0/+.125"
Accessories | |||
Enlarged Cuffs | J Locks | Bridge Clamps | Connectors - Aluminum |
Latch Locks | Pin Locks | Screw Clamps | Fabric Cuffs |
Flexaust® is a registered Trademark of Schauenburg Company